13.1.13 PRIVATE NETWORK FEATURES
Case 3:
A public CO line call directed to extension 1033 arrives at
→The target extension number is not found at the local PBX, so the call is redirected to the specified TIE Line, and the call is connected to extension 1033 of
–Hardware Requirement
The
–System programming is required to enable this feature.
–If a dialed number is not found at a remote PBX, the call cannot be redirected to the local PBX to search for a matching number.
•When a TIE line call arrives at a busy extension which has disabled Call Waiting, the caller will hear a busy tone. If required, Intercept Routing can be activated.
•The
4.4
PC Programming Manual References
3.14
3.17
4.4
4.8
→ Idle Line Access (Local Access)
→ Trunk Group Access
→ TIE Line Access
4.8
4.11
4.17
5.1
11.1
12.2
→DIL— DIL
12.3
PT Programming Manual References
[453]DID Destination
[500]Trunk Group Number
Feature Manual References
1.1.3ARS (Automatic Route Selection)
3.1.8Call Transfer
4.1.7DISA (Direct Inward System Access)
6.1.4Flexible Numbering/Fixed Numbering
6.1.6FWD (Call Forwarding)
9.1.11Intercept Routing
17.1.6TRS (Toll Restriction)
Document Version | Feature Manual |
241