Panasonic KX-TDA50 manual Disa Security Mode and Available Features, Disa Intercept Routing-Busy

4.1.7 DISA (Direct Inward System Access)

	Outgoing	Floating			Automated Attendant No.*2
	Message
		Extn. No.*1	0	1	2	3	4	5	6	7	8	9
	(OGM) No.
	01	501	100	301	200	103	202	101	102	400	104	205
	02	502
	:	:	:	:	:	:	:	:	:	:	:	:
*1	→ 7.4 [5-3-2] Voice Message—DISA Message—				Floating Extension Number

→[730] Outgoing Message (OGM) Floating Extension Number

*2	→ 7.4	[5-3-2] Voice Message—DISA Message—	1 Digit AA Destination (Extension Number)—Dial0–9
*3	→ 7.4	[5-3-2] Voice Message—DISA Message—	Busy / DND Message No.

Busy/DND

Message

No.*3

04

05

:

DISA Security Mode and Available Features

If the DISA AA service is not employed, the caller may access the PBX features by entering the feature numbers. To prevent others from accessing the PBX features, it is possible to assign DISA security.

→7.3 [5-3-1] Voice Message—DISA System— DISA Security—DISA Security Mode

→[732] DISA Security Mode

The features available depend on the preprogrammed DISA security mode as follows:

Security Mode

All Security

CO Line Security

No Security

ü: Available

Intercom	TIE Line Call
Call	Without PBX Code	With PBX Code
ü	ü
ü	ü	ü

CO Line Call

ü*1

*1 If CO line call is available, Account Code Entry (→ 1.1.2 Account Code Entry) is also available.

Note

DISA AA service and Operator Call (→ 12.1.5 Operator Features) are available for any security mode.

Security Mode Override by Verification Code Entry

If the caller performs Verification Code Entry (→ 19.1.1 Verification Code Entry) while hearing a DISA message, the security mode can be temporarily changed to No Security mode.

Entry method:

Verification Code Entry feature number + + verification code + verification code PIN After changing mode, the new mode remains in force for the duration of the call.

DISA Intercept Routing—Busy

If the first destination called by the outside party is busy, the call is redirected as follows:

a.The call is redirected to the Intercept Routing—Busy destination assigned to the first destination.

b.If an Intercept Routing—Busy destination is not assigned to the first destination and a prerecorded DISA Busy Message is assigned, the caller will hear the DISA Busy Message.

c.If neither an intercept destination nor a DISA Busy Message is assigned, the caller will hear a busy tone.

→6.1 [4-1-1] Wired Extension—ExtensionSettings—Intercept Destination— Intercept Destination—When Called Party is Busy

Document Version 2008-11 Feature Manual

79