15.1.3 Room Status Control
15.1.3 Room Status Control
Description
A proprietary telephone (PT) with a
Any wired extension can be used as a room extension without special programming.
Flexible buttons on the hotel operator’s extension can be set as Room Status Control buttons. The 3 types of Room Status Control buttons are as follows:
•
Switches the status of selected room extensions from
Remote Extension Dial Lock is turned off, allowing calls to be made from the extension.
•
Switches the status of selected room extensions from
Room extension data, such as Timed Reminder or Last Number Redial data, is cleared, and Remote Extension Dial Lock is turned on, restricting some calls. This can be useful to prevent the room extension from being used when no guest is checked in.
•
Switches the status of selected room extensions between Ready and Not Ready.
When a guest checks out of a room, the room status becomes
Room Status Control Mode
Pressing a Room Status Control button when the PT is idle allows the hotel operator extension to enter Room Status Control mode. When in Room Status Control mode, the corresponding Room Status Control button’s light flashes red. The Room Status Control button that was pressed determines which room status each room extension can be switched to. For example, if the
In addition, DSS buttons on the hotel operator’s extension or a paired DSS Console show the room status of each extension as follows:
Light Pattern
Off
Flashing Red
Red on
Status
Document Version | Feature Manual |
281