4.1.3 Dial Tone
→ Dialing Mode
→ DTMF Width
→ Pulse Speed
3.17
→ CO Dial Mode
→ DTMF Width
→ CO Pulse Speed
PT Programming Manual References
[410]LCOT Dialing Mode
[411]LCOT Pulse Rate
[412]LCOT DTMF Minimum Duration
4.1.3Dial Tone
Description
The following dial tones inform extension users about features activated on their extensions: Each dial tone type has two frequencies, such as dial tone 1A and dial tone 1B.
Type
Tone 1A/1B
Tone 2A/2B
Tone 3A/3B
Description
A normal dial tone is heard when:
a.No features listed for dial tones 2 through 4 has been set, or
b.Automatic Route Selection (ARS) is used.
This tone is heard when:
•There are messages that have previously been listened to and no new messages on the SVM card.*1
•Any of the features below are set.
•Absent Message
•BGM
•Call Forwarding (FWD)
•Call Pickup Deny
•Call Waiting
•Do Not Disturb (DND)
•Extension Dial Lock
•Executive Busy Override Deny
•Hot Line
•Timed Reminder
This tone is heard when:
•A called PS is being searched for.
•The recording time used by the Simplified Voice Message (SVM) feature reaches the limit.*1
•Any of the features below are performed.
•Account Code Entry
•Consultation Hold
•Answering a Timed Reminder call with no message
Document Version | Feature Manual |
69