Panasonic KX-TDA50 manual Example of Wireless XDP Parallel Mode, XDP Parallel Mode

20.1.4 Wireless XDP Parallel Mode

This mode is similar to XDP Parallel mode used to pair DPTs with SLTs. (→ 5.1.7 Extension Port Configuration)

In order to use a PS in Wireless XDP Parallel mode, the mode must be turned on using the PS.

[Example of Wireless XDP Parallel Mode, XDP Parallel Mode]

PBX

CSIF Card

DHLC Card Extension Card

Cell Station

DPT	Wireless Phone	Wired Telephone	PS
	(or any SLT)	(APT, DPT, SLT)
XDP Parallel Mode		Wireless XDP
		Parallel Mode
	Extn. 102	Extn. 103

Conditions

•Whether or not a PS is allowed to pair itself with a wired telephone is determined by the COS assigned to the extension number of the wired telephone.

•Wireless XDP Parallel mode can be turned on or off using the PS only.

•To switch between the wired telephone and the PS during a conversation, simply go off-hook with the other telephone. Alternatively, to seize a separate line, use another method, such as pressing a CO or INTERCOM button.

In addition, going off-hook with the other telephone seizes a separate line when the extension is:

a.Engaged in a conference call. (→ 3.1.16 Conference, → 5.1.3 Executive Busy Override, → 13.1.12 Privacy Release)

b.Screening a call using Live Call Screening (LCS) or when recording a conversation using Two-way Record. (→ 19.1.4 Voice Mail DPT (Digital) Integration)

c.Receiving an Off-hook Call Announcement (OHCA). (→ 12.1.3 OHCA (Off-hook Call Announcement))

d.Being monitored by another extension. (→ 3.1.4 Call Monitor)

e.When the extension has a call on consultation hold. (→ 3.1.18 Consultation Hold)

•When a PS in Wireless XDP Parallel mode is on a call, other extension users cannot perform the following features when they call this extension:

– Executive Busy Override (→ 5.1.3 Executive Busy Override)

– Whisper OHCA (→ 20.1.3 Whisper OHCA)

•When a PS is paired with a wired telephone, most of the extension settings assigned to the wired telephone (extension number, extension name, etc.) will be used by the PS, and the PS will use its own extension settings once again when Wireless XDP Parallel mode is canceled. Note, however, that the following extension settings of the wired telephone are copied to the extension settings of the PS when Wireless XDP Parallel mode is activated, and will remain in effect for the PS after the mode is canceled.

– Call Waiting Setting (→ 3.1.9 CALL WAITING FEATURES)

– FWD/Do Not Disturb (DND) Setting (→ 4.1.9 DND (Do Not Disturb), → 6.1.6 FWD (Call Forwarding))

Document Version 2008-11 Feature Manual

351