18.1.1 Upgrading the Software
18.1 U
18.1.1 Upgrading the Software
Description
It is possible to upload software from a PC to the PBX to upgrade the following:
Data File
Main Processing (EMPR/MPR) software data
Default system programming data for each country/area
Language data for PT display
LPR (software on a slot card) software data
Cell Station (CS) software data
Storing Area
Operating system data area on either the EMPR card of the
Country/area data area on the EMPR card, MPR card, or Main Board
Each language data area on the EMPR card, MPR card, or Main Board.
There are two types:
Type 1: Proprietary Telephone (PT) display except for PT system programming (→ 13.1.28 PT Programming) (five languages max.)
Type 2: PT system programming data (one language max.)
Flash ROM on the appropriate optional services card (e.g., DHLC, DLC, T1, PRI, etc.)
Flash ROM on the CS
Conditions
•The software version of the EMPR or MPR card can be confirmed through system programming.
Installation Manual References
KX-TDA100/KX-TDA200
2.3.1MPR Card
KX-TDA600
2.3.1EMPR Card
PC Programming Manual References
3.3
PT Programming Manual References
[190] Main Processing (MPR) Software Version Reference
324
Feature Manual | Document Version |