13.1.11 Printing Message
13.1.10 Predialing
Description
A display proprietary telephone (PT) user can check and correct the number to be dialed
Conditions
•Storing the Predialed Number in Personal Speed Dialing
The predialed number can be stored in Personal Speed Dialing by pressing the AUTO DIAL/STORE button (→ 16.1.3 Speed Dialing, Personal). In this case, the extension will enter personal programming mode automatically so that a name can be assigned to the stored number.
Operating Manual References
3.1.2 Personal Programming
13.1.11 Printing Message
Description
An extension user can select a message to be output on SMDR. Up to eight messages can be preprogrammed in the Printing Message table, and are available to all extensions connected to the PBX. A message can contain the "%" symbol, which requires a number to be entered in its place when the message is selected at an extension.
Depending on the content of the preprogrammed messages, this feature can be used to record a variety of information, which can be output on SMDR to, for example, a connected PC.
[Example]
If message 1 is preprogrammed as "Started work", and message 2 as "Finished work", employees can sign in by selecting message 1 when starting work, and sign out by selecting message 2 when finishing. A connected PC can then be used to generate employee work records.
Conditions
•Up to seven "%"s can be stored for each message.
PC Programming Manual References
4.8
8.2
Feature Manual References
16.1.1SMDR (Station Message Detail Recording) 21.1 Capacity of System Resources
Operating Manual References
1.3.50 Printing Message
220
Feature Manual | Document Version |