9.1.10 INCOMING CALL FEATURES
CO Line | Port (Channel) | Networking Type | |
|
| ||
Card | Type | Public | Private |
LCOT |
|
|
|
| ELCOT / LCOT |
|
|
| GCOT |
|
|
T1 | DID |
|
|
|
|
| |
| TIE (E&M) |
|
|
| OPX (EXTN.) |
|
|
| CO |
|
|
PRI | Extension |
|
|
|
| ||
|
|
| |
|
|
| |
|
|
| |
Default |
|
|
|
Available |
|
|
|
2.Distribution Method
Each public CO line port (channel) can use a different method of directing calls to their destinations as they are received.
Distribution Method
Direct In Line (DIL)
Direct Inward Dialing (DID)
Description
Directs a call to a preprogrammed destination, such as an operator, based on the CO line carrying the call.
Directs a call received on a DID line to a preprogrammed destination based on the telephone number dialed by the caller.
Details in
→4.1.6 DIL (Direct In Line)
→4.1.5 DID (Direct Inward Dialing)
Calling Line Identification (CLI) distribution is the most customizable call distribution method available. It allows calls from specific people to be directed to specific destinations, based on the callers’ telephone numbers. CLI distribution, when enabled for the current time mode, takes precedence over DIL or DID distribution.
Distribution Method
Calling Line Identification (CLI) Distribution
Description
Directs a call to its preprogrammed destination if the caller’s telephone number and its CLI destination has been stored in the System Speed Dialing Table.
Details in
→3.1.12 CLI (Calling Line Identification) Distribution
Document Version | Feature Manual |
161