10.1.4 Local Alarm Information
Method
Prime Line
Description
When an extension user goes
Conditions
•Line Preference Override
A user can override the preset Line Preference temporarily by pressing the desired Line Access button or a Memory Dialing button, such as
•To select Idle Line Preference, the trunk groups available to the extension should be programmed on a COS basis. Also trunk groups available for Idle Line Access should be assigned.
PC Programming Manual References
4.12
5.2
6.1
6.10
PT Programming Manual References
[103]Idle Line Access (Local Access)
[500]Trunk Group Number
Operating Manual References
3.1.2 Personal Programming
10.1.4 Local Alarm Information
Description
When the PBX detects an error, the System Alarm button on the proprietary telephone (PT) of an extension which is allowed to use this feature through system programming (a maximum of two extensions per PBX), lights red. Pressing the button will show the error number on the display. If multiple errors occur, the error number will be displayed in order of highest priority to lowest. The System Alarm button light turns off automatically after all error numbers have been displayed.
For details about the errors and their solutions, refer to the Installation Manual.
180
Feature Manual | Document Version |