20.1.2 Walking Extension
Feature Manual References
3.1.19 COS (Class of Service)
4.1.7 DISA (Direct Inward System Access)
Operating Manual References
1.3.72Walking COS
20.1.2Walking Extension
Description
It is possible for an extension user to trade extension settings with another extension.
When Walking Extension is executed, all extension settings (extension number, Class of Service (COS),
This feature is useful when an extension user moves desks, or when an extension user has no permanent desk.
This feature is also known as Walking Station.
Conditions
•This feature allows extension settings to be switched between PTs (including
•Incoming calls to your extension will reach you at your new location.
•An extension personal identification number (PIN) is required to use this feature. (→ 5.1.6 Extension PIN (Personal Identification Number))
•If a DSS Console is connected to a PT and the DSS Console is continuously used with the PT after the Walking Extension has been performed, the new extension number of the PT must be assigned as the paired extension through system programming.
•If the Walking Extension feature is performed at the same time that the target extension is being programmed by PC, the Walking Extension feature may not work properly. (→ 13.1.6 PC Programming)
•If this feature is performed using an extension with a Bluetooth wireless headset connected, the Bluetooth device cannot be used with the new extension. To use the Bluetooth wireless headset, register it to the new extension.
PC Programming Manual References
4.8
6.1
6.17
PT Programming Manual References
[007] DSS Console Paired Telephone
Operating Manual References
1.3.73 Walking Extension
Document Version | Feature Manual |
349