1.1.6 Automatic Fax Transfer
1.1.5 Automatic Extension Release
Description
After going
This feature is also known as Automatic Station Release.
Conditions
•A proprietary telephone (PT)/portable station (PS) user hears a reorder tone for a preprogrammed time period, and then the PT/PS returns to idle status automatically. A single line telephone (SLT) user will hear a reorder tone until he or she goes
•This feature works in one of the following cases: When making an intercom call
a.The first digit is not dialed within a preprogrammed time period.
b.A digit is dialed, but subsequent digits are not dialed within a preprogrammed time period.
PC Programming Manual References
4.4
→
→
→ Tone
→ Tone
1.1.6 Automatic Fax Transfer
Description
The PBX can distinguish between fax calls and other types of calls arriving on DISA lines, and automatically transfer fax calls to preprogrammed destinations. When a call arrives on a DISA line, an OGM is played (→
12.1.2OGM (Outgoing Message)). At the same time, the PBX begins fax signal detection. If a fax signal is detected, the PBX recognizes that the call is a fax call, and transfers the call to the fax destination assigned to that OGM through system programming. This allows a single CO line to be used seamlessly for both voice and fax calls, with only voice calls arriving at user extensions.
This feature is only available for the
[Available Automatic Fax Transfer Destinations]
Destination
Wired Extension
PS
ICD Group
PS Ring Group
Floating Extension no. for SVM
VM Group (DTMF/DPT)
External Pager (TAFAS)
Availability
ü
ü*1
ü
Document Version | Feature Manual |
23