4.1.8 Display Information
Operating Manual References
1.3.18DISA (Direct Inward System Access)
1.3.72Walking COS
4.1.8Display Information
Description
A display proprietary telephone (PT) can relay the following information to the user while making or receiving calls:
Display Item
The extension number and name of the calling or called extension, or Incoming Call Distribution (ICD) Group
Status of the called extension
The number and name of the optional device
The telephone number dialed
The received call information
a.Caller’s name
b.Caller’s number
c.CO line number/name
d.Original Destination, if the call is forwarded
e.DID name
Duration of the current CO line call
Display Example
123: Tom Smith
123: Busy
D02: 1st Door
1234567890
ABC Company 12345678
Line 001: Sales →102:Mike
Panasonic
Line 001 11:02’28
Condition
–
–
–
–
The first line message can be either (a), (c), or (e) at each extension through system programming. These can be displayed in turn by pressing the TRANSFER button or DISP Soft button during a call.
–
Conditions
•Multilingual Display
Each extension can select its display language through personal programming (Display Language Selection).
•Display Contrast
The display contrast can be adjusted through personal programming (Display Contrast Selection). This is available only for DPTs and
•Display Backlight
Some extensions can select whether to turn the display backlight on or off through personal programming (Display Backlight Selection). For details, refer to the manual for your telephone.
•Characters (name) or digits (number) exceeding the display’s limitations are not displayed. Although in this case information may not be displayed properly, the received information is not altered.
PC Programming Manual References
4.17
6.1
Document Version | Feature Manual |
85