3.1.6 Call Pickup
→ Optional Parameter (or Ringing Tone Type Number) (for Call Park)
6.17
→ Type
→ Parameter Selection (for Call Park)
→ Optional Parameter (Ringing Tone Type Number) (for Call Park)
Feature Manual References
6.1.3 Flexible Buttons
21.1 Capacity of System Resources
Operating Manual References
1.3.6Call Hold
3.1.6Call Pickup
Description
An extension user can answer a call ringing at any other extension. The following types of Call Pickup are available:
Type
Directed
Group
Description
A specified extension’s call is answered.
A call within a specified call pickup group is answered.
Call Pickup Deny
An extension user can prevent other extensions from picking up calls ringing at his or her own extension.
Conditions
•Call Pickup applies to:
Intercom, CO line, and doorphone calls
•Internal Call Block
An extension which cannot call certain extensions based on Class of Service (COS) programming (→ 9.1.14 Internal Call Block) also cannot pick up calls ringing at those extensions.
[Directed Call Pickup]
•A user can also pick up a call to a specified extension by pressing the corresponding DSS button. This feature is only available when (1) the user’s extension is allowed to use this feature through COS programming (for
The light pattern of a DSS button for an incoming call to an extension or Incoming Call Distribution (ICD) group can be programmed through system programming. Call Pickup is available only when the DSS button is red flashing.
44
Feature Manual | Document Version |