Bosch Appliances ICP-CC488 manual ICP-CP516 Sixteen Zone Codepads

ICP-CC488 Installation Guide 2.0		Codepad Indicators		EN 13
			Each time a new system fault is detected (the FAULT
Table 10: Area On/Off Indicators
			indicator flashes), the codepad beeps once per min.
			Press [AWAY] to stop the beeping and to
Indicator	Definition		acknowledge the fault.
On	The area is armed in AWAY		PARTIAL Indicator
	Mode or STAY Mode 1.
			The PARTIAL indicator lights when the system is
Off	The area is disarmed.
			armed in STAY Mode 1. The PARTIAL indicator
Area Display Indicators
			flashes with the AUX indicator when Installer’s
The group of four Area Display indicators shows the
			Programming Mode or a Master Code function is
area to which the eight zones belong. For example, if			active. Refer to Table 13 on page 13.

the Area 1 indicator is lit, the Zones indicators
				Table 13:		PARTIAL Indicator
correspond to the zones assigned to that area.
Press [AWAY] to move to the next area display. For
example, if the Area 1 indicator is lit, pressing
				Indicator		Definition
[AWAY] extinguishes the Area 1 indicator and lights
				On		The system is armed in STAY Mode 1.
the Area 2 indicator.
				Off		The system is not armed in STAY Mode 1.
Table 11:	Area Display Indicators			Flashing		Installer’s Programming Mode or a Master
						Code function is active.
				Audible Indicators
Indicator		Definition		The codepad provides a number of audible
On		Information is displayed for the area.
				indications. Refer to Table 8 on page 11.
Off		Information is not displayed for the area.
			2.4		ICP-CP516 Sixteen Zone Codepads
AUX Indicator
If Options 8 is selected in Location 500 (refer to				The ICP-CP516 Sixteen Zone Codepad must be used
				with sixteen wireless zone systems. The sixteen zone
Section 19.3.1 Partitioning Options 1 on page 85), the
				codepads operation and display similarly to 8 zones
AUX indicator lights when the control panel is using
				codepads, but also display zones 9 through 16.
the telephone line. The AUX indicator also flashes
with the PARTIAL indicator when Installer’s				Figure 4:		ICP-CP516W Sixteen Zone LED
Programming Mode or Master Code functions are						Codepad
used.
Table 12:	AUX Indicator
Indicator		Definition
On		The control panel is using the
		telephone line.
Off		The control panel is not using the
		telephone line.
Flashing		Installer’s Programming Mode or a
		Master Code function is active.

MAINS Indicator

The MAINS indicator shows the status of the AC MAINS supply (refer to Table 6 on page 11).

When programming in Installer’s Programming Mode or using a Master Code function, the MAINS indicator lights to indicate a location value from 10 to

15.The MAINS indicator represents the 10 digit, which is added to the value of the lit zone indicator (for example, if the value programmed in a location is 12, the MAINS and Zone 2 indicators light).

FAULT indicator

The FAULT indicator lights when the system detects a system fault (refer to Table 7 on page 11). Refer to Section 3.12 Fault Analysis Mode on page 18 for more information on system faults.

Figure 5: ICP-CP516LW Sixteen Zone LCD Codepad

Bosch Security Systems, Inc. 12/08 F01U089457-02