Bosch Appliances Comprehensive Guide to Bosch Alarm Fault Codes and Remote Operations for ICP-CC488

ICP-CC488 Installation Guide 4.0 Remote Radio Transmitter Operations

EN 20

Table 15: Fault Analysis Conditions

Zone Indicator	Fault Description	Hold Down Button	Zone Indicator	Fault Condition
1	System fault	1	1	Low battery
			2	Date and time
			3	RF receiver jamming
				RF receiver tamper switch
				RF receiver communications fail
			4	Horn speaker
			5	Telephone line fail
			6	EEPROM fail
			7	AUX Power Supply fail
2	RF low battery	2	1 to 16	Zones 1 to 16 RF low battery
3	Zone Tamper Alarm	3	1 to 16	Zones 1 to 16 Tamper Alarm
4	Sensor watch fail	4	1 to 16	Zones 1 to 16 sensor watch fail
5	RF sensor watch	5	1 to 16	Zones 1 to 16 RF sensor watch fail
6	Communications fail	6	1	Receiver 1 fail
			2	Receiver 2 fail

4.0 Remote Radio Transmitter Operations

Figure 8: RF3334: 4-Button Keyfob Transmitter

The ICP-CC488 Control Panel can be remotely operated using hand-held remote radio transmitters. You can use either a 2-button or a 4-button hand- held transmitter to operate the system.

Figure 7: RF3332: 2-Button Keyfob

Transmitter

1

2

5

1

2

3

4

3

1 – Arm button

2 – Disarm button

3 – Arm and Disarm buttons: Press both buttons at same time for 2 sec to send a Panic alarm

1 – Arm button

2 – Disarm button

3 – Option 1 button

4 – Option 2 button.

5 – Arm and Disarm buttons: Press both buttons at same time for 2 sec to send a Panic alarm

The 2-button and 4-button hand-held transmitters can remotely arm and disarm the system in AWAY Mode or STAY Mode 1, and can activate remote Panic Alarms. The 4-button hand-held transmitter has the added ability to operate the control panel’s programmable outputs to activate a garage door or outside lights, for example.

Bosch Security Systems, Inc. 12/08 F01U089457-02