CONNAITRE SACONOZCA SUKNOWING YOUR
MACHINEMÁQUINASEWING
A COUDREDE COSERMACHINE
A
B
C
12
1
2
2
1
Lower Threading
CAUTION
Setting the bobbin improperly may cause the thread ten- sion to loosen, breaking the needle and resulting in injury.
1Wound evenly
2 Wound poorly
CAUTION
Be sure to turn off the power. If you accidentally press on the foot controller and the machine begins to operate, injury could result.
1.Raise the needle to its highest position by turning the handwheel toward you (counterclockwise) and raise the presser foot lever.
2.Slide the bobbin cover latch to the right and open the cover. (Fig. A)
1Slide bobbin cover latch
2 Cover
3.Insert bobbin and pass thread through the bobbin thread path, then pull the thread forward to cut. (Fig. B)
CAUTION
Be sure the bobbin is set so the thread unrolls in the correct direction. If the thread unrolls in the wrong direction, it may cause the thread tension to be incorrect or the needle to break.
4.Replace the bobbin cover. (Fig. C) Place the left tab in place (see arrow 1 at left), then press lightly on the right side (see arrow
2 at left) until the cover clicks into place.
*You can begin sewing immediately without drawing up the bobbin thread.
23