Brother Sewing Manching manual Using Needle Threader

A	1
CONNAITREMACHINECOUDRESAA CONOZCAMÁQUINACOSERSUDE KNOWINGSEWINGMACHINEYOUR	2

3

2	1
	4

B

6

5 5

C

D

27

Using Needle Threader

Turn power switch to “O”.

1.Lower the presser foot lever.

2.Turn the handwheel toward you (counter-clockwise) to raise the needle to the highest position.

CAUTION

When using the needle threader, be sure the needle is in the highest position. Otherwise, the hook may be damaged.

3.While lowering the needle threader lever, hook the thread onto the guide. (Fig. A)

1Needle

2Needle threader lever

3 Guide

4.Pull down the needle threader lever as much as possible, then rotate the lever toward the back of the machine (away from you). Make sure that the hook passes through the eye of the needle catching the thread. (Fig. B)

•Hold the thread in front of the needle in order to make sure that the hook catches the thread.

1Needle

2Needle threader lever

3 Guide

4 Hook holder

5.While lightly holding the thread, rotate the needle threader lever toward the front of the machine (toward you). (Fig. C) The hook will pull the thread through the needle eye.

5Hook

6 Thread

6.Raise the needle threader lever and pull out about 5 cm (2") of thread through the needle toward the back of the sewing machine. (Fig. D)

CAUTION

The needle threader can only be used with home sewing machine needles size 75/11-100/16. Check the table on page 33 for appropriate needle and thread combinations. Note that, if you are using transparent nylon mono-filament thread, only needles in the range of 90/14-100/16 can be used.

CAUTION

The needle threader can not be used to thread the needle when you are using decorative threads or specialty needles like the twin needle and wing needle. When using those types of threads or needles, thread the eye of the needle manually from front to back. Make sure the main power switch is OFF when threading the needle manually.