1
Buttonhole Fine Adjustment
If the stitching on the two sides of the buttonhole do not appear uniform, the following adjustments can be made.
1.Set the Stitch Length Dial at
2.If the right side of the buttonhole is too coarse or fine, adjust the feeding of the material with the Stitch Length Dial.
F
2
3
F
4
F
1Right side of buttonhole
2 Stitch length dial
3 Shorter
4 Longer
5 Adjusted stitch
3.After obtaining a satisfactory feeding on the right side, stitch the left side of the buttonhole and observe the feeding.
4.If the left side is too coarse or fine compared to the right side, adjust the buttonhole fine adjustment screw as described below.
COUTUREOJALESBUTTONHOLE DE BOUTONNIERESY COSTURA DEAND BUTTON ETBOTONES DE BOUTONSSEWING
55
6
7
8
9 9
+ | – | + | – |
If the left side is too coarse, turn the screw with the enclosed large screwdriver in the – direction.
If the left side is too fine, turn the screw with the enclosed large screwdriver in the + direction.
This adjustment allows both sides of the buttonhole to appear
uniform.
6Stitch length dial
7Buttonhole fine adjusting screw
8 Left side of buttonhole
9 Adjusted stitch
51