Bosch Appliances PGL985UC manual Gas type changing, From natural gas to propane

IMPORTANT INFORMATION
Gas type changing:
From natural gas to propane					Figure 4
It is necessary that all operations related with
installation, adjustment or adaptation				LP
gas be performed by authorized personnel
of our Technical Service, and that the regulations
in force, as well as the requisites of the gas
companies, be followed.
IMPORTANT: Before you begin, turn off the gas
and electricity supply to the appliance.
Before connecting up the appliance to the
installation, first check that it has been adjusted
for the type of gas that is to be supplied. Our
cooktops are delivered from factory prepared
to operate with the gas type indicated on the
specifications plate.
The propane gas tank must be equipped with its
own high pressure regulator in addition to the
pressure regulator supplied with this unit.
Supply Pressure
Natural Gas - 7" wc (17.5 mbar) minimum.
Propane Gas - 11" wc (27.4 mbar) minimum.					7 mm.
The maximum supply pressure to this appliance
shall not exceed 14" water column (34.9 mbar).
This cooktop can be adapted to work
with LP gas. To do so, the following
procedures must be completed:
A) Change of cooktop burner tips. (See table1).
	T ABLE 1
	Burner data
The burner must be used with the		G A S	NATURAL	PROPANE
gases	indicated on the	TYPE
specifications plate.
Gas pressure for use			6”	10”
Burner	Burner tip marker	BTU/hr	133	95
Rapid	Consumption Rated		10.000	10.000	Figure 5
	(Hs)
Burner	Burner tip marker	BTU/hr	110	77
s e m i -	Consumption Rated		7.000	7.000
rapid	(Hs)
B u r n e r	Burner tip marker		98	69
Auxiliary	Consumption Rated	BTU/hr	5.500	5.500
	(Hs)
Large	Burner tip marker	BTU/hr	106/81	72/55
Burner	Consumption Rated		15.300	15.300
Triple-flame(Hs)
1 - Remove the grates, covers and the main
body of the burner.
2 - Change the burner tips using a 7 mm socket
wrench and make sure that they are tightened all
the way in order to ensure that they are correctly
sealed. Figure 4.
The adjustment of primary air must not be performed
on these burners.
B) Reduced consumption adjustment of the cooktop
burner taps.
1 - Set the taps to the minimum setting.
2 - Remove the control knobs from the taps.
Figure 5.
					19