Sample VCX Server Reconfiguration 119
Sample VCX Reconfiguration Script (continued)
Do you wish to change any of the IP Messaging System parameters? [N] :
Press the Enter or Return key to accept the data that you have accepted
or changed. To review the data and make additional changes, enter Y.
--------- Configuring additional parameters for Auth & Dir Service ---------
At a branch office, the password for access to the regional office system's
'cworks' account is required. At a regional office or on a standalone
system, specify the 'cworks' password for access to *this* system.
Login Password :
Login Password (confirm) :
This cworks password is used for authentication when replicating this
server's database on a remote Authentication and Directory server. This
password must be the same as the cworks account password on the
remote server. It is not necessarily the same as the password used to log
in to the local cworks account configured earlier in this script.
Do you wish to change any of the Auth & Dir Service parameters? [N] :
Press the Enter or Return key to accept the default answer (N) and make
no further changes. If you want to make additional changes, enter Y.
------------ Configuring additional parameters for Common Agent ------------
The Trap Destination specifies the IP address to be used as a destination
when this system sends SNMP traps.
Trap Destination : 10.230.64.70
Press the Enter or Return key to accept the IP address of the existing
Network Management Station or enter a new IP address. In this sample
script, the address remains unchanged.
The Trap Community String provides a community string to be used when
sending SNMP traps to the trap destination.
Trap Community String : public
Press the Enter or Return key to accept the existing trap community string
or enter a new string.