Manually Configuring Replication for an IP Telephony Server or IP Telephony and Messaging Server 91
Manually Configuring Replication for an IP Telephony Server or IP Telephony and Messaging Server This section provides instructions on how to manually perform database
replication for these two configurations:
■Regional IP Telephony Server — An IP Telephony Server configuration
includes the Accounting Services, the Call Records Services, the Call
Processor, and the Authentication and Directory Services.
In this case there is only one “Region”, the single site. One server is
designated as the Primary, and one is designated the Secondary.
■Regional IP Telephony and Messaging Server — An IP Telephony and
Messaging Server configuration includes the Accounting Services, the
Call Records Services, the Call Processor, IP Messaging Services, and
the Authentication and Directory Services.
In this case there is only one “Region”, the single site. One server is
designated as the Primary, and one is designated the Secondary.
For these configurations replication must be started manually with the
setupReplication script.
1Perform the following steps on the primary and secondary servers.
aLogin as root.
bEnter the following commands:
modfw -p oracle allow <IP address of eth0 for the other
server>
modfw -p oracle allow <IP address of eth1 for the other
server>
cStop the VCX Authentication and Directory server.
cd /opt/3com/VCX/scripts/rc3.d
./S20vcxdata stop
dStop the Tomcat application.
./S70tomcat stop
Remember to perform these steps on each server (primary and
secondary).
2On the primary server log in as cworks and enter these commands:
cd /opt/3com/VCX/vcxdata/bin
./setupReplication
The script starts to run.
3Enter the requested information.