Upgrading a Multi-Site System With No Branch Offices 189
4Start the Authentication and Directory service on the primary IP Telephony
server and the secondary IP Telephony server by entering the following
commands:
cd /opt/3com/VCX/scripts/rc3.d
./S20vcxdata start
5Start the Tomcat process on the primary IP Telephony server and the
secondary IP Telephony server by entering the following command:
./S70tomcat start
Upgrading a
Multi-Site System
With No Branch
Offices
Some VCX multi-site systems have regional offices but no branch offices.
Each regional office contains a primary VCX server and a secondary VCX
server. These servers perform call processing and IP Messaging tasks. One
of the regional offices also contains a Call Records server which gathers
call records from each of the regional offices.
■To upgrade the primary VCX server and the secondary VCX server,
follow the instructions in Upgrading a Single-Site System With Two
Servers earlier in this appendix.
■To upgrade the Call Records server, see the following section,
Upgrading the Call Records Server.
Upgrading the Call
Records Server
To upgrade the Call Records server:
1Log in to the Call Records server as root.
2Stop all VCX processes on the Call Records server by entering the
following command:
cd /etc/init.d
./vcx stop
3Obtain a copy of the vcx-bss-7.1.xc.tar software upgrade file and
place it in the /opt/installtemp directory on the Call Records server.
4Enter these commands:
cd /opt/installtemp
tar xvf vcx-bss-7.1.xc.tar
cd upgrade-7.1.xc
./install-upgrade
The system may prompt you to confirm that a new operating system
version will be installed and indicates which disk partition will be used
after the upgrade. If you see such a prompt, answer y.