242 APPENDIX B: UPGRADING VCX SERVER SOFTWARE FROM V7.1.X TO V7.1.Y
Telephony and Messaging Server for more information. In this
example, there is one Master site, Region 1.
cThe Enter the MASTER DEFINITION SITE IP Address [IP
address] prompt appears.
Enter the IP address of the Master Definition site. This is the IP address
of the eth0 interface on this server (the Authentication and Directory
server in Region 2).
dThe Enter the MASTER SITE 1 IP Address [0.0.0.0] prompt
appears.
Enter the IP address of the Master Site. This is the IP address of the
eth0 interface on the Authentication and Directory server in Region 1.
If there are more than one Master Sites, this question repeats until the
number of master sites specified in step b is reached.
eThe Do you want to continue with the above settings? [n/y]:
prompt appears.
Enter y to continue. The script executes.
When the replication is complete, Multi-Master Replication Status is
reported as NORMAL. Do not continue to the next step on this server
until the replication is complete. Note that replication can take
approximately 20 minutes to complete.
fYou can check the replication by entering the following command:
./checkReplication
7Once replication is complete and status is NORMAL on Region 1 and
Region 2, start the Authentication and Directory servers in each region by
entering the following commands while logged in as root:
cd /opt/3com/VCX/scripts/rc3.d
./S20vcxdata start
8Start the Tomcat process on the primary Call server and the secondary
Call server in each region by entering the following commands:
cd /opt/3com/VCX/scripts/rc3.d
./S70tomcat start
Upgrading the
Regional IP
Messaging Servers
This section describes how to upgrade regional IP Messaging servers.
These servers may provide messaging services for users using one of the
following methods:
■Global Voicemail Integration — In version 7.1, multi-site VCX systems
can be configured to use Global Voicemail Integration. This service is