Upgrading a Single-Site System With Four Servers 225
4Start the Authentication and Directory service on the primary VCX server
and the secondary VCX server by entering the following commands:
cd /opt/3com/VCX/scripts/rc3.d
./S20vcxdata start
5Start the Tomcat process on the primary VCX server and the secondary
VCX server by entering the following command:
./S70tomcat start
6Start IP Messaging on the primary VCX server by entering the following
command:
./S60ums start
Upgrading a
Single-Site System
With Four Servers
Single-site VCX systems can have either two servers or four servers.
■In a two-server configuration, each server runs IP Telephony server
software and IP Messaging server software.
■In a four-server configuration, one pair of servers runs IP Telephony
server software; the second pair of servers runs IP Messaging server
software.
Follow the procedures in this section to upgrade the four-server
configuration at a single site from one version of VCX software (7.1.x) to
a later version (7.1.y).
Before you begin the upgrade procedures on the four servers, perform
these steps.:
1Log in as root on the primary IP Telephony server and on the secondary IP
Telephony server.
2Stop the Tomcat process, first on the primary IP Telephony server and
then on the secondary IP Telephony server by entering these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S70tomcat stop
3Ensure that database replication has no errors (see Preliminary Steps) and
then drop replication on the primary IP Telephony server by entering these
commands:
cd /opt/3com/VCX/vcxdata/bin
su cworks
./dropReplication