Sample VCX Server Reconfiguration 121
Sample VCX Reconfiguration Script (continued)
Common Agent supports a management station authentication feature.
Answering 'Y' here will allow only a set of pre-identified SNMP management
stations to manage the system. (You will be able to enter IP addresses of
authorized management stations next. Authorized management stations can
also be configured using EMS or another management station at a later
point.)
Enable management station authentication? [N] :
Press the Enter or Return key to accept the default answer (N) and
continue with no management station authentication. Enter Y if you
want to specify up to four management station IP addresses.
Do you wish to change any of the Common Agent parameters? [N] :
Press the Enter or Return key to accept the default answer (N) and use the
data that you have accepted or modified. Enter Y to make additional
changes.
----------------------------------------------------------------------------
VCX reconfiguration is now complete. Before the information just entered
is saved, you have the option of reviewing and changing parameters for each
VCX service at a detailed level. This is not needed in most cases and is
recommended only for advanced users.
Do you wish to review service parameters in detail? [N] :
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script enters a mode in which you can
review and modify low-level configuration parameters for each service.
This is not needed for standard configurations and using it successfully
requires substantial VCX configuration expertise. 3Com does not support
this mode of making configuration changes.
----------------------------------------------------------------------------
Please wait while the wizard completes.