3Com V7000 - page 146

146 CHAPTER 9: CONFIGURING THE CALL PROCESSOR

CAUTION: If you add one or both of these services using the method

described in this section and later you run the vcx-reconfigure

command, the list of services provided in vcx-reconfigure will override

those defined using remoteCli. Furthermore, if you reconfigure your VCX

system using remoteCli and subsequently upgrade the system to a newer

release, the upgrade process will not recognize the remoteCli

reconfiguration. You will have to manually reconfigure your system using

remoteCli to match your previous configuration. Consult with your 3Com

representative before using the remoteCli to configure Accounting

services or Authentication and Directory services on your VCX system.

Adding Primary and

Secondary

Accounting Servers

To add a primary Accounting server using the remoteCLI interface:

1Log onto the server hosting the primary Call Processor.

2Navigate to the /opt/3com/VCX/callprocessor/remoteCli/bin.

3Start the remoteCLI interface:

./remoteCli -callprocessor

4At the remoteCli prompt (>) enter:

config acctc use=false

config accts pri=1 IpAddress=<IP address of primary

Accounting server>

config accts pri=1 LocalIpAddress=<IP address of call

processor>

config acctc use=true

5The interface lists the IP address of the new Accounting server.

6To ex it the remoteCLI interface, enter: