220 APPENDIX B: UPGRADING VCX SERVER SOFTWARE FROM V7.1.X TO V7.1.Y
■In a four-server configuration, one pair of servers runs IP Telephony
server software; the second pair of servers runs IP Messaging server
software.
Follow the procedure in this section to upgrade the two-server
configuration, at a single site, from one version of VCX software (7.1.x) to
a later version (7.1.y).
Before you begin the upgrade procedures on the primary VCX server and
on the secondary VCX server, perform these steps.:
1Log in as root on the primary VCX server and on the secondary VCX
server.
2Stop the Tomcat process, first on the primary VCX server and then on the
secondary VCX server by entering these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S70tomcat stop
3Ensure that database replication has no errors (see Preliminary Steps) and
then drop replication on the primary VCX server by entering these
commands:
cd /opt/3com/VCX/vcxdata/bin
su cworks
./dropReplication
The drop replication script starts. Follow these steps:
aThe Enter the VCX Site Identification i.e. Site Id prompt
appears.
Enter site ID configured for this system. For single-site systems, the site
ID is identical for both the primary VCX server and the secondary VCX
server.
bThe Enter the Number of MASTER SITEs other than the MASTER
DEFINITION SITE [1]: prompt appears.
Press Enter to accept the default.
cThe Enter the MASTER DEFINITION SITE IP Address [IP
address] prompt appears.
Enter the IP address of the Master Definition site or press Enter if the
displayed address is correct. This is typically the IP address of the
primary VCX server.
dThe Enter the MASTER SITE 1 IP Address [0.0.0.0] prompt
appears.