172 APPENDIX A: UPGRADING VCX SERVER SOFTWARE FROM V7.0 TO V7.1
aThe Enter the VCX Site Identification i.e. Site Id prompt
appears.
Enter site ID configured for this system. For single-site systems, the site
ID is identical for both the primary VCX server and the secondary VCX
server.
bThe Enter the Number of MASTER SITEs other than the MASTER
DEFINITION SITE [1]: prompt appears.
Press Enter to accept the default.
cThe Enter the MASTER DEFINITION SITE IP Address [IP
address] prompt appears.
Enter the IP address of the Master Definition site or press Enter if the
displayed address is correct. This is typically the IP address of the
primary VCX server.
dThe Enter the MASTER SITE 1 IP Address [0.0.0.0] prompt
appears.
Enter the IP address of the Master Site. This is typically the IP address
of the secondary VCX server.
eThe Do you want to continue with the above settings? [n/y]:
prompt appears.
Enter y to continue. The script executes.
4Enter the following command to exit the cworks account and return to
the root account:
exit
5Stop IP Messaging, first on the primary VCX server and then on the
secondary VCX server by entering these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S60ums stop
6Obtain a copy of the vcx-all-7.1.xc.tar software upgrade file and
place it in the /opt/installtemp directory on the primary VCX server
and on the secondary VCX server. The variable x indicates the version of
VCX software (for example, vcx-all-7.1.3c.tar) that will replace the
current version. The letter c is always appended to the version number.
Next, execute the following steps in the order listed:
■Upgrade the primary VCX server. See Upgrading the Primary VCX
Server.