Upgrading a Single-Site System With Four Servers 265
Enter site ID configured for this system. For single-site systems, the site
ID is identical for both the primary IP Telephony server and the
secondary IP Telephony server.
bThe Enter the Number of MASTER SITEs other than the MASTER
DEFINITION SITE [1]: prompt appears.
Press Enter to accept the default.
cThe Enter the MASTER DEFINITION SITE IP Address [IP
address] prompt appears.
Enter the IP address of the Master Definition site or press Enter if the
displayed address is correct. This is typically the IP address of the
primary IP Telephony server.
dThe Enter the MASTER SITE 1 IP Address [0.0.0.0] prompt
appears.
Enter the IP address of the Master Site. This is typically the IP address
of the secondary IP Telephony server.
eThe Do you want to continue with the above settings? [n/y]:
prompt appears.
Enter y to continue. The script executes.
4Enter the following command to exit the cworks account and return to
the root account:
exit
5Stop IP Messaging, first on the primary IP Messaging server and then on
the secondary IP Messaging server by entering these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S60ums stop
6Obtain a copy of the vcx-softswitch-7.0.xc.tar software upgrade file
and place it in the /opt/installtemp directory on the primary IP
Telephony server and on the secondary IP Telephony server. The variable x
indicates the version of VCX software (for example,
vcx-all-7.0.3c.tar) that will replace version 6.0. The letter c is always
appended to the version number.
7Obtain a copy of the vcx-ipmsg-7.0.xc.tar software upgrade file and
place it in the /opt/installtemp directory on the primary IP Messaging
server and on the secondary IP Messaging server.