Upgrading a Multi-Site VCX System with Branch Offices 195
If you do not have a UPS installed and enter n (or press Enter); the
remaining UPS configuration prompts are not displayed.
If you do have a UPS installed and enter y and see Configuring UPS
Monitoring for information on the subsequent UPS configuration
prompts.
10 After completing the UPS Monitoring prompts, the server reboots. When
the reboot process has been completed, the system starts VCX 7.1.x
services.
After the system has completed the restart process, verify that the
upgrade has occurred by entering the following command:
ls -l /opt/3com/VCX
The symbolic link (VCX) should point to the new version of the VCX
software (7.1.xc). If the link does not point to the new version, wait a few
minutes and reenter the command. This could take several minutes and it
is important the link pointer is correct before proceeding.
Example Output: /opt/3com/VCX -> /opt/3com/VCX.7.1.xc
11 Enter the following commands to stop the Authentication and Directory
server on Region 1:
cd /opt/3com/VCX/scripts/rc3.d
./S20vcxdata stop
To upgrade the Authentication and Directory server in Region 2:
1Log in, as root, to the Call server in Region 2.
2Stop the Tomcat process by entering the following commands:
cd /opt/3com/VCX/scripts/rc3.d
./S70tomcat stop
3Log in, as root, to the Authentication and Directory server in Region 2.
4Ensure that database replication has no errors (see Preliminary Steps) and
then drop replication by entering the following commands:
cd /opt/3com/VCX/vcxdata/bin
su cworks
./dropReplication
The drop replication script starts. Follow these steps:
aThe Enter the VCX Site Identification i.e. Site Id prompt
appears.
Enter the site ID configured for Region 2.