258 APPENDIX C: UPGRADING VCX SERVER SOFTWARE FROM V6.0 TO V7.0
total 8
lrwxrwxrwx 1 root root 63 Jun 15 2006
activation.key ->
/opt/3com/licenses/SNAm-Fro7-vrJa-YKhH-H8az-db7Q.activation.
key
-rw-r--r-- 1 root root 1792 Jun 15 2006
SNAm-Fro7-vrJa-YKhH-H8az-db7Q.activation.key
CAUTION: Do not edit this file. The activation key file content is signed. If
you edit this file, you will invalidate it.
You can use the vcx-licensequery --all command to display
information about the currently installed VCX software license, for
example, serial number, customer name, expiration date, and number of
supported phone and IP Messaging clients.
Upgrading a
Single-Site System
With Two Servers
Single-site VCX systems can have either two servers or four servers.
■In a two-server configuration, each server runs IP Telephony server
software and IP Messaging server software.
■In a four-server configuration, one pair of servers runs IP Telephony
server software; the second pair of servers runs IP Messaging server
software.
Follow the procedure in this section to upgrade the two-server
configuration at a single site from VCX software version 6.0 to version
7.0.
All upgrade commands are executed locally at the console.
Before you begin the upgrade procedures on the primary VCX server and
on the secondary VCX server, perform these steps.:
1Log in as root on the primary VCX server and on the secondary VCX
server.
2Stop the Tomcat process, first on the primary VCX server and then on the
secondary VCX server by entering these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S70tomcat stop
3Drop database replication on the primary VCX server by entering these
commands: