236 APPENDIX B: UPGRADING VCX SERVER SOFTWARE FROM V7.1.X TO V7.1.Y
To upgrade the Authentication and Directory server in Region 1:
1Log in, as root, to the Call server in Region 1.
2Stop the Tomcat process by entering the following commands:
cd /opt/3com/VCX/scripts/rc3.d
./S70tomcat stop
3Log in, as root, to the Authentication and Directory server in Region 1.
4Ensure that database replication has no errors (see Preliminary Steps) and
then drop replication by entering the following commands:
cd /opt/3com/VCX/vcxdata/bin
su cworks
./dropReplication
The drop replication script starts. Follow these steps:
aThe Enter the VCX Site Identification i.e. Site Id prompt
appears.
Enter the site ID configured for Region 1.
bThe Enter the Number of MASTER SITEs other than the MASTER
DEFINITION SITE: prompt appears.
Enter the number of Master sites. To determine the number of Master
sites associated with this server, use the listVcxdata command. See
Manually Configuring Replication for an IP Telephony Server or IP
Telephony and Messaging Server for more information. In this
example, there is one Master site, Region 2.
cThe Enter the MASTER DEFINITION SITE IP Address [IP
address] prompt appears.
Enter the IP address of the Master Definition site. This is the IP address
of the eth0 interface on this server (the Authentication and Directory
server in Region 1).
dThe Enter the MASTER SITE 1 IP Address [0.0.0.0] prompt
appears.
Enter the IP address of the Master Site. This is the IP address of the
eth0 interface on the Authentication and Directory server in Region 2.
If there are more than one Master Sites, this question repeats until the
number of master sites specified in step b is reached.
eThe Do you want to continue with the above settings? [n/y]:
prompt appears.
Enter y to continue. The script executes.