96 CHAPTER 6: MANUALLY CONFIGURING MULTI-MASTER REPLICATION
hEnter Site ID of Region 2.
iFor the Master Definition Site enter the IP address of Region 2.
jFor the Master Site enter the IP address of Region 1.
kOn each VCX Authentication and Directory server run
checkReplication to verify replication is normal.
lLog in as cworks and enter these commands:
cd /opt/3com/VCX/vcxdata/bin
./checkReplication
mRestart Tomcat on each region’s Call serve. Log in as root and enter
these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S70tomcat start
nRestart the Authentication and Directory service on each region’s
Authentication and Directory server. Log in to each server as root and
enter these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S20vcxdata start
Verifying Replication at a Branch Office
Database replication between a branch office and the regional office
associated with the branch is started automatically when VCX software is
installed on the branch. This section describes how to verify that
replication is enabled.
For replication of branch databases, the host Regional data server of the
branch office is always the Master Definition Site.
Use the following procedure to verify the branch office replication with
the host Regional VCX Authentication and Directory server.
1Login on the branch office for which you want to verify replication as
cworks and enter these commands:
cd /opt/3com/VCX/vcxdata/bin
./checkReplication
The script starts to run.
The Enter the VCX Site Identification i.e. Site Id: appears.
2Enter the site ID of the branch office you are logged into.