264 APPENDIX C: UPGRADING VCX SERVER SOFTWARE FROM V6.0 TO V7.0
6Start IP Messaging on the primary VCX server by entering the following
command:
./S60ums start
Run the admincfg script on both the primary VCX server and the
secondary VCX server. See Post-Upgrade Requirements.
Upgrading a
Single-Site System
With Four Servers
Single-site VCX systems can have either two servers or four servers.
■In a two-server configuration, each server runs IP Telephony server
software and IP Messaging server software.
■In a four-server configuration, one pair of servers runs IP Telephony
server software; the second pair of servers runs IP Messaging server
software.
Follow the procedures in this section to upgrade the four-server
configuration at a single site from VCX software 6.0. to version 7.0.
All upgrade commands are executed locally at the console.
Before you begin the upgrade procedures on the four servers, perform
these steps.:
1Log in as root on the primary IP Telephony server and on the secondary IP
Telephony server.
2Stop the Tomcat process, first on the primary IP Telephony server and
then on the secondary IP Telephony server by entering these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S70tomcat stop
3Drop database replication on the primary IP Telephony server by entering
these commands:
cd /opt/3com/VCX/vcxdata/bin
su cworks
./dropReplication
The drop replication script starts. Follow these steps:
aThe Enter the VCX Site Identification i.e. Site Id prompt
appears.