3Com V7000 - page 95

Manually Configuring Region to Region Replication 95
gLog in as cworks, and enter these commands:
cd /opt/3com/VCX/vcxdata/bin
./restoreVcxdata
hEnter the Site ID for Region 1.
iEnter these commands:
./backupVcxdata
cd /opt/3com/VCX/vcxdata/db/export
There should be a single file with this format:
vcxdata<region 2 site ID>backup<vcx data version>.tgz
jTo place the file on the VCX Authentication and Directory server in
Region 1, enter these commands:
scp vcxdata<region2_siteID>backup.<vcx_data_version>.tgz
cworks@<region1_IPaddress>:/opt/3com/VCX/vcxdata/db/export
kLog in to Region 1’s VCX Authentication and Directory server as
cworks and enter these commands:
cd /opt/3com/VCX/vcxdata/bin
./restoreVcxdata
lEnter the Site ID for Region 2.
4Set up replication on both of the VCX Authentication and Directory
servers.
aVerify that Tomcat on Region 1’s Call server is stopped.
bOn Region 1’s VCX Authentication and Directory server, login as
cworks and enter these commands:
cd /opt/3com/VCX/vcxdata/bin
./setupReplication
cEnter Site ID of Region 1.
dFor the Master Definition Site enter the IP address of Region 1.
eFor the Master Site enter the IP address of Region 2.
fIf not already stopped, stop Tomcat on the Region 2 Call server.
gOn Region 2’s VCX Authentication and Directory server, login as
cworks and enter these commands:
cd /opt/3com/VCX/vcxdata/bin
./setupReplication