3Com V7000 - page 60

60 CHAPTER 3: MANAGING VCX SERVERS

Verifying SNMP Support

To verify that either the acctxmlconfig.xml (Accounting service) or

vcxdataconfig.xml (Authentication and Directory service) files are set up

for the back-end server:

1Log in to the server hosting the service using the root account.

2Enter the following command:

cd /opt/3com/VCX/<schema>/conf

For <schema>, enter acctxml for the Accounting service or enter vcxdata

for the Authentication and Directory service.

3Open the acctxmlconfig.xml file or the vcxdataconfig.xml file.

4Find the SNMP Configuration tag, verify that the SNMP Common Agent is

enabled.

It should look like this:

^M

^M

5If SNMP support is disabled, continue with Enabling SNMP Support.

Enabling SNMP Support

To enable SNMP support:

1Log in to the server hosting the service using the root account.

2Stop the Common Agent service by entering the following commands:

cd /opt/3com/VCX/commagent/vcx-scripts/init.d

./commagent stop

3Stop the service on which you want to enable SNMP support (see

Stopping a Service).

4Enter the following command to change directories:

cd /opt/3com/VCX/<schema>/conf

For <schema>, enter acctxml for the Accounting service or enter vcxdata

for the Authentication and Directory service.

5Edit the acctxmlconfig.xml file or the vcxdataconfig.xml file.

Example:

^M

^M