Aastra Telecom 480I CT manual Installation Requirements

IP Phone Administrator Guide Firmware Installation Information

Overview

Installation Requirements

The following are general requirements for setting up and using your SIP IP phone:

•A SIP-based IP PBX system or network installed and running with a number created for the new IP phone.

•Adherence to SIP standard RFC 3261.

•Access to a configuration server where you can store the firmware image and configuration files.

•The IP phone must be configured for a specific type of protocol to use. TFTP is enabled by default. You can configure the following protocols on the IP phone:

—TFTP (Trivial File Transfer Protocol)

—FTP (File Transfer Protocol)

—HTTP (Hypertext Transfer Protocol)

Note: If you set TFTP, the configuration server must be able to accept connections anonymously.

•A 802.3 Ethernet/Fast Ethernet LAN

•Category 5/5e straight through cabling

•Power over Ethernet (PoE) power supply (optional accessory – necessary only if no inline power is provided on the network). (Not applicable to 9112i)

•Power adapter (included for certain models of 9112i, 9133i, and 480i CT).

1-4 41-001129-00 Rev 09, Release 1.4.1