Aastra Telecom 480I CT manual Programmable Configuration Using Configuration Files

IP Phone Administrator Guide Operational Features

Operational Features

Programmable Configuration Using Configuration Files

In the configuration files, you configure Park/Pickup using the softkey parameters. You must specify the"softkeyN value" and "prgkeyN value" as <server type;server-specific value>. The following examples show Park/Pickup configurations using specific servers.

Model 480i/480 CT Examples

Server	Park Configuration	Pickup Configuration
Asterisk	softkeyN type: park	softkeyN type: pickup
	softkeyN label: parkCall	softkeyN label: pickupCall
	softkeyN value: asterisk;700	softkeyN value: asterisk;700
	softkeyN line: 1	softkeyN line: 1
	softkeyN states: connected*	softkeyN states: idle,outgoing**
Sylantro	softkeyN type: park	softkeyN type: pickup
	softkeyN label: parkCall	softkeyN label: pickupCall
	softkeyN value: sylantro;*98	softkeyN value: sylantro;*99
	softkeyN line: 1	softkeyN line: 1
	softkeyN states: connected*	softkeyN states: idle,outgoing**
BroadWorks	softkeyN type: park	softkeyN type: pickup
	softkeyN label: parkCall	softkeyN label: pickupCall
	softkeyN value: broadworks;*68	softkeyN value: broadworks;*88
	softkeyN line: 1	softkeyN line: 1
	softkeyN states: connected*	softkeyN states: idle,outgoing**
ININ PBX	softkeyN type: park	softkeyN type: pickup
	softkeyN label: parkCall	softkeyN label: pickupCall
	softkeyN value: inin;callpark	softkeyN value: inin;pickup
	softkeyN line: 1	softkeyN line: 1
	softkeyN states: connected*	softkeyN states: idle,outgoing**

*When you configure a softkey as "Park", you must configure the state of the softkey as "connected".

**When you configure a softkey as "Pickup", you can configure the state of the softkey as "idle, outgoing", or just "idle", or just "outgoing".

5-50 41-001129-00 Rev 09, Release 1.4.1