Aastra Telecom 480I CT manual Setting Time/Date on IP Phones, Feature Method of configuration

IP Phone Administrator Guide Advanced Network Settings

Configuring the IP Phones

Aastra Web UI

Step Action

3Enter an IP address or qualified domain name in the "Time Server 1", "Time Server 2", and/or "Time Server 3" field(s) to specify the location of the NTP time server.

Note: To enable/disable time serving, set the time/date format, and set the time zone, see “Time Server Settings” on page A-23.These parameters can be set using the configuration files only.

4 Click to save your changes.

Setting Time/Date on IP Phones

In addition to enabling/disabling the time server, you can also set the time and date, set the time and date format, set the time zone, and set daylight savings time on the IP phones. You configure these features using the configuration files, the IP Phone UI, or the Aastra Web UI. The following table identifies which method of configuration applies to each feature.

Feature	Method of configuration
Set Time	IP Phone UI
Set Time Format	IP Phone UI
	Configuration Files
Set Date	IP Phone UI
Set Date Format	IP Phone UI
	Configuration Files
Set Time Zone	IP Phone UI
	Configuration Files
Set Daylight Savings Time	IP Phone UI
	Configuration Files

Use the following procedures to set a time and date, time and date format, time zone, and daylight savings time on the IP phones.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Time and Date Settings” on page A-25.

4-34 41-001129-00 Rev 09, Release 1.4.1