Aastra Telecom 480I CT manual Enabling/Disabling Callers List, Callers list disabled

Operational Features

Operational Features

Enabling/Disabling Callers List

You can enable and disable user access to the Callers List on the IP phones using the following parameter in the configuration files:

•callers list disabled

Valid values for this parameter are 0 (enabled) and 1 (disabled). If this parameter is set to 0, the Callers List can be accessed by all users. If this parameter is set to 1, the IP phone does not save any caller information to the Caller List. For 480i and 480i CT phones, the "Caller List" option on the IP phone is removed from the Services menu, and the Caller List key is ignored if pressed by the user.

Use the following procedures to enable/disable the Callers List on the IP phones.

Configuration Files

For specific parameters you can set in the configuration files for enabling/disabling the Callers List, see Appendix A, the section, “Callers List Settings” on page A-64.

Using the Callers List

Use the following procedure to access and use the Callers List.

IP Phone UI

Step Action

For the 480i/480i CT:

1Press xon the phone to display the Services menu. or

Press the skey to enter the Callers List directly. (skip to step 3)

2From the Services menu, select "Callers List".

3Use the rand sto scroll through the line items in the Callers List.

Note: To the left of a line item, a bicon displays with the handset ON or OFF the receiver. The ON receiver indicates the call came in as a missed call. The OFF receiver indicates the call came in and was answered.

Operational Features

41-001129-00 Rev 09, Release 1.4.1 5-71