Aastra Telecom 480I CT manual For softkey type Flash, For softkey type Park, Incoming, Outgoing

Configuration Parameters

Softkey/Programmable Key Parameters

Parameter –	Aastra Web UI		Operation->Softkeys and XML
softkeyN states	Configuration Files		aastra.cfg, <mac>.cfg
Idle, Connected, Incoming,
Outgoing
(in Web UI)
Description	Displays the status of the phone when a softkey is pressed. You can
	enter multiple values (idle, connected, incoming, outgoing) for the
	"softkeyN state" parameter.
	You must associate the softkeyN state parameter with a specific softkey.
	In the following example, the softkeyN states parameter is associated
	with softkey 12:
	softkey12 type: speeddial
	softkey12 label: voicemail
	softkey12 value *89
	softkey12 states: outgoing
	Note: The IP phone idle screen condenses the softkeys. So in the
	previous example, softkey 12 will appear in position 1 if no other softkeys
	are set. A softkey type of "empty" does not display on the idle screen at
	all.
Format	Text
Default Value	For softkey types - Line, DND, speeddial, BLF, BLF List, XML, lcr,
	empty:
	idle, connected, incoming, outgoing
	For softkey type - Flash:
	<blank>
	For softkey type - Park:
	connected
	For softkey type - Pickup:
	idle, outgoing
Range	Valid values are:
	idle	The phone is not being used.
	connected	The line currently being displayed is
		in an active call (or the call is on hold)
	incoming	The phone is ringing.
	outgoing	The user is dialing a number, or the
		far-end is ringing.
	Note: For softkey type, Pickup, values can be: idle, outgoing,
	idle outgoing.
Example	softkey1 states: idle incoming outgoing
	softkey2 states: connected
41-001129-00 Rev 09, Release 1.4.1			A-99

Appendix A