IP Phone Administrator Guide Firmware and Configuration Files

Overview

References

For setting up and configuring the IP phone using either the IP phone UI, the Aastra Web UI, or the configuration files, see Chapter 4, “Configuring the IP Phones.”

For information about the softkey and programmable key parameters, see Appendix A, the section, “Softkey/Programmable Key Parameters” on page A-93.

Installing the Firmware/Configuration Files

 

The following procedure describes how to install the firmware and configuration

 

files.

 

 

Step

Action

 

 

1

If DHCP is disabled, manually enter the configuration server’s IP address. For details on setting

 

DHCP, see Chapter 4, the section “DHCP” on page 4-4.

2

Copy the firmware file <phone model>.st to the root directory of the configuration server. The IP

 

phone accepts the new firmware file only if it is different from the firmware currently loaded on the IP

 

phone.

 

Note: The <phone model> attribute is the IP phone model (i.e., 480i.st, 9133i.st)

 

 

3

Copy the Aastra configuration files (aastra.cfg and <mac>.cfg) to the root directory of the

 

configuration server.

 

Note: The <mac> attribute represents the actual MAC address of your phone.

 

(i.e., 00085D030996.cfg).

4

Note: Restart tthe IP phone as described in the section, “How to Restart the IP Phone” on page .

 

 

1-8

41-001129-00 Rev 09, Release 1.4.1

Page 24
Image 24
Aastra Telecom 480I CT manual Installing the Firmware/Configuration Files, Step Action