Aastra Telecom 480I 480i/480i CT, Network Port 9112i only, Network Port 1 and Port 2 9133i only

Administrator Options

Administrator Level Options

480i/480i CT

Phone Status

1.	Network Status
2.	Firmware Version
3.	Restart Phone
4.	Factory Default

Show

Done

The following information displays for phone status on the IP phone UI:

•Network Port (9112i only)

Displays the network status of the Ethernet port at the back of the phone. Also displays the IP and MAC address of the phone. These fields are read-only.

•Network Port 1 and Port 2 (9133i only)

Displays the network status of the Ethernet ports at the back of the phone. Also displays the IP and MAC address of the phone. These fields are read-only.

•Network Status (480i and 480i CT only)

Displays the network status of the Ethernet ports at the back of the phone. You can also view the phone’s IP and MAC addresses. These fields are read-only.

•Firmware Version

Displays information about the firmware that is currently installed on the IP phone.

•Restart Phone

This option lets you reboot the phone. A reset may be necessary when:

-There is a change in your network, OR

-To re-load modified configuration files, OR

-If the settings for the IP phone on the IP PBX system have been modified.

Administrator Options

41-001129-00 Rev 09, Release 1.4.1 3-7