Aastra Telecom 480I CT manual Basic SIP Network Settings, Advanced SIP Settings

IP Phone Administrator Guide

Administrator Level Options

Basic SIP Network Settings

Administrator Options

•Proxy Server

(Proxy IP in the configuration files). IP address of the SIP proxy server. Up to 64 alphanumeric characters. Configurable on a global and per-line basis.

•Proxy Port

SIP proxy server’s port number. Default is 0. Configurable on a global and per-line basis.

•Outbound Proxy Server

Address of the outbound proxy server. All SIP messages originating from the phone are sent to this server. For example, if you have a Session Border Controller in your network, then you would normally set its address here. Default is 0.0.0.0. Configurable on a global and per-line basis.

•Outbound Proxy Port

The proxy port on the proxy server to which the IP phone sends all SIP messages. Default is 0. Configurable on a global and per-line basis.

•Registrar Server

(Registrar IP in the configuration files). IP address of the SIP registrar. Up to 64 alphanumeric characters. Enables or disables the phone to be registered with the Registrar. When Register is disabled globally, the phone is still active and you can dial using username and IP address of the phone. A message "No Service" displays on the idle screen and the LED is steady ON. If Register is disabled for a single line, no messages display and LEDs are OFF. Configurable on a global and per-line basis.

•Registrar Port

SIP registrar’s port number. Default is 0. Configurable on a global and per-line basis.

•Registration Period

(Not configurable via IP Phone UI). The requested registration period, in seconds, from the registrar. Configurable on a global and per-line basis.

Advanced SIP Settings

In addition to the basic SIP settings, you can also configure the following advanced SIP parameters. These parameters are not configurable via the IP phone UI.

3-16 41-001129-00 Rev 09, Release 1.4.1