Aastra Telecom 480I CT manual Configuring Vlan optional, Select Network, Select Priority

IP Phone Administrator Guide Advanced Network Settings

Configuring the IP Phones

Configuring VLAN (optional)

Use the following procedures to configure VLAN on the IP phone.

Note: VLAN is disabled by default. When you enable VLAN, the IP phones use the default settings for each VLAN parameter. You can change the default settings if required using the following procedure.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Virtual Local Area Network (VLAN) Settings” on page A-18.

IP Phone UI

Step Action

1For 9112i/9133i:

Press Ion the phone to enter the Options List.

For 480i/480i CT:

Press %on the phone to enter the Options List.

2Select Network.

3Select VLAN.

To globally enable/disable VLAN and set priority for non-IP packets:

4Select VLAN Enable, and press Change to set VLAN Enable to Yes (or No to disable)

5Press Done to save the changes.

6Select Phone.

7Select Priority.

8Select Other and enter a non-IP priority value from 0 to 7 for non-IP packets.

9Press Done to save the changes.

10Press Done again to return to the VLAN Phone menu.

To set VLAN ID and priority for Port 0:

4-28 41-001129-00 Rev 09, Release 1.4.1