Aastra Telecom 480I manual Operational, Basic, and Advanced Parameters, Network Settings, Format

Configuration Parameters

Operational, Basic, and Advanced Parameters

Operational, Basic, and Advanced Parameters

The following sections provide the configuration parameters you can configure on the IP phone. Each parameter table includes the name of the parameter, a description, the format, default value, range, and example. The table also provides the method for which the parameters can be configured (IP phone UI, Aastra Web UI, or configuration files).

Network Settings

Parameter –	IP phone UI	Options->Network Settings
dhcp	Aastra Web UI	Advanced Settings->Network
DHCP	Configuration Files	aastra.cfg, <mac>.cfg
(in Web UI)
Description	Enabling DHCP will populate most of the network information. The DHCP
	server should serve the network information that the IP phone requires. If
	the IP phone is unable to get any required information then it should be
	entered manually. Parameters affected: ip. Use "0" to disable DHCP and
	"1" to enable DHCP.
Format	Integer
Default Value	1
Range	0 or 1
Example	dhcp: 1

Appendix A

Parameter –	IP phone UI	Options->Network Settings
ip	Aastra Web UI	Advanced Settings->Network
Ip Address	Configuration Files	aastra.cfg, <mac>.cfg
(in Web UI)
Description	This parameter assigns a static IP address to the IP phone device.
Format	IP address
Default Value	0.0.0.0
Range	Not Applicable
Example	ip: 192.168.0.25

41-001129-00 Rev 09, Release 1.4.1 A-5