Aastra Telecom 480I CT manual State-Based Softkeys 480i/480i CT only

Operational Features

Operational Features

•spre - Indicates the softkey or programmable key is set to automatically activate specific services offered by the server. For example, if the spre value of *82 is configured, then by pressing the softkey, *82 automatically activates a service provided by the server. The value you enter for this field is dependent on the services provided by the server.

•park- Indicates the softkey is set to be used as a park key to park an incoming call. (For more information on park, see the section Park Calls/Pick Up Parked Calls on page 5-45.)

•pickup - Indicates the softkey is set to be used as a pickup key to pick up a parked call. (For more information on pickup, see the section Park Calls/Pick Up Parked Calls on page 5-45.)

•lcr - Indicates the softkey is set to be used as a “last call return” key.

(For more information on lcr, see the section Last Call Return (lcr) (Sylantro Servers only) on page 5-58.)

•empty (480i, 480i CT) - Indicates the softkey is configured to force a blank entry on the IP phone display for a specific softkey. The soft keys are added in order (from softkey1 to softkey20) after any hard-coded keys have been added. If a particular soft key is not defined, it is ignored.

State-Based Softkeys (480i/480i CT only)

Users and administrators can configure a specific state to display when a softkey is being used. Available states you can configure for each softkey include:

•idle - The phone is not being used.

•connected - The line currently being displayed is in an active call (or the call is on hold)

•incoming - The phone is ringing.

•outgoing - The user is dialing a number, or the far-end is ringing.

Operational Features

41-001129-00 Rev 09, Release 1.4.1 5-13