Aastra Telecom 480I CT manual Select Operation-Reset and click

IP Phone Administrator Guide Configuration Server Protocol

Configuring the IP Phones

Aastra Web UI

Step Action

2Select the protocol from the "Download Protocol" list box.

The IP phone uses the protocol you select to download new firmware and configuration files from the configuration server. Use the following table to configure the applicable server.

TFTP

- Enter an IP address or qualified domain name in the "TFTP Server" field.

Optional: You can also configure an alternate TFTP server if required. If "Use Alternate TFTP" is enabled, you must also enter an IP address or qualified domain name for the alternate server in the "Alternate TFTP" field.

FTP

-Enter an IP address in the "FTP Server" field.

Optional: You can enter a username and password for accessing the FTP server if required.

-Enter a user name for a user that will access the FTP server in the "FTP User Name" field.

-Enter a password for a user that allows access to the FTP server in the "FTP Password" field.

HTTP

-Enter an IP address in the "HTTP Server" field.

-Enter a root sub-directory path for the HTTP server in the "HTTP Path" field.

Optional: You can enter a list of users to be authenticated when they access the HTTP server in the "HTTP POST Authentication List" field.

3	Click	to save your settings.
	Note: The session prompts you to restart the IP phone to apply the configuration settings.
4	Select Operation->Reset and click		..

4-14 41-001129-00 Rev 09, Release 1.4.1