Aastra Telecom 480I CT manual Network Satus, Hardware Information, Firmware Information

Administrator Options

Administrator Level Options

The following information displays for phone status in the Aastra Web UI at the location Status->System Information. This information is available to the user and the administrator as read-only.

•Network Satus

Displays the network status of the Ethernet ports at the back of the phone. You can also view the phone’s IP and MAC addresses. Information in this field includes Link State, Negotiation, Speed, and Duplex for Port 0 and Port 1.

•Hardware Information

Displays the current IP phone platform and the revision number.

•Firmware Information

Displays information about the firmware that is currently installed on the IP phone. Information in this field includes Firmware Version, Firmware Release Code, Boot Version, Release Date/Time.

•Factory Default Feature

Auser and administrator can restart the phone at Operation->Reset->Phone. However, only an administrator has access to restoring factory defaults to the IP phone at Operation->Reset->Current Settings.

There are two options for setting factory defaults using the Aastra Web UI:

-Restore to Factory Defaults

-Remove Local Configuration Settings

The "Restore to Factory Defaults" option resets the factory defaults for all of the settings in the aastra.cfg, <mac>.cfg, and local configuration. Performing this option results in losing all user-modified settings.

The "Remove Local Configuration Settings" option resets the settings on the local IP phone configuration only.

Reference

For procedures in setting factory defaults, see Chapter 9, “Troubleshooting.”

Administrator Options

41-001129-00 Rev 09, Release 1.4.1 3-9