Aastra Telecom 480I CT manual Factory Default admin only, All Defaults Config Only

IP Phone Administrator Guide Administrator Level Options

Administrator Options

•Factory Default (admin only)

This option lets you reset the phone to its factory default settings. There are two options in setting the factory defaults on the IP phone:

-All Defaults

-Config Only

The "All Defaults" option resets the factory defaults for all of the settings in the aastra.cfg, <mac>.cfg, and local configuration. Performing this option results in losing all user-modified settings.

The "Config Only" option resets the settings on the local IP phone configuration only.

Phone Status via Aastra Web UI

In the Aastra Web UI, the "Network Status", "Hardware Information", and

"Firmware Information" options are read only and available for viewing by the user and administrator. Resetting the IP phone to factory defaults using the Aastra Web UI (Operation->Reset->Current Settings) is available to the administrator only.

3-8 41-001129-00 Rev 09, Release 1.4.1